Worms body is not displayed during playing any game !!

[dramma86]

Hi all

Thanks all for your appreciated efforts

I have just downloaded WORMs Revolution on my PC

every things was going properly.. but when l lunched any game, the worms body is not displayed in the map !! only the energy is shown.. also the map is not displayed properly !!

[vackillers]

Make sure your graphics drivers are up to date, and list your system specs so we can get a better idea what the issue is... maybe a screenshot of whats going on in your game would help

[dramma86]

http://199.91.152.145/s70e5t1ls1vg/wi00m9mmt7yo8fa/20130225_121921.jpg

http://205.196.123.170/dgqggb9p6cng/k9cnza1fncxt6v4/20130225_121936.jpg

Time of this report: 2/24/2013, 13:23:49
Machine name: AHMAD-PC
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130104-1431)
Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
System Model: Satellite A300
BIOS: Default System BIOS
Processor: Intel(R) Core(TM)2 Duo CPU T5850 @ 2.16GHz (2 CPUs), ~2.2GHz
Memory: 3072MB RAM
Available OS Memory: 3070MB RAM
Page File: 2196MB used, 3941MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode


Display Devices
---------------
Card name: ATI Mobility Radeon HD 3400 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter (0x95C4)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_95C4&SUBSYS_FF1C1179&REV_00
Display Memory: 1531 MB
Dedicated Memory: 252 MB
Shared Memory: 1278 MB
Current Mode: 1280 x 800 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: LP154WX4-TLC8
Monitor Id: LPL0120
Native Mode: 1280 x 800(p) (59.976Hz)
Output Type: Internal
Driver Name: atiumdag.dll,atidxx32.dll,atidxx64,atiumdva.cap,at iumd64,atiumd6a,atitmm64
Driver File Version: 8.14.0010.0678 (English)
Driver Version: 8.632.1.2000
DDI Version: 10.1
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 8/18/2009 02:20:38, 3105280 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled

[vackillers]

you'll have to play around with some graphic settings, it could be a shadow issue, jus turning then down to low.... also disable any AA if you have that enabled.. and make sure your running latest ATI drivers graphics drivers for your laptop..

[dramma86]

you'll have to play around with some graphic settings, it could be a shadow issue, jus turning then down to low.... also disable any AA if you have that enabled.. and make sure your running latest ATI drivers graphics drivers for your laptop..

Thanks for your reply

I have checked my graphic drivers .. no any update available

I have turned the shadow Qly to low .. but no any improvement

I didnt understand what you mean by "AA" disabling ?? can you explain please ?

[BethanyTeam17]

Card name: ATI Mobility Radeon HD 3400 Series
Driver Date/Size: 8/18/2009 02:20:38, 3105280 bytes


Hi dramma86,

Sorry to hear you're having problems with Worms Revolution. Unfortunately your graphics card is below the minimum spec for the game. The minimum specification ATI card with recommend is the Radeon HD 3650 (512 MB).

Also, your graphic card drivers are from 2009, so are likely to be out of date. I know you said you've checked for an update already but can you please try to again by following the steps below:

1. Go to http://support.amd.com/us/gpudownload/windows/Pages/auto_detect.aspx
2. Install ‘AMD Driver Autodetect’ application.
3. Select yes on to allow application to run if prompt appears.
4. Select ‘Download Now’ and follow the steps to install the driver.
5. Restart your computer, if necessary after installation of drivers.

For any further assistance please contact our support team via support@team17.com.

Thank you

[vackillers]

let us know if you ever fixed the problem by doing what was suggested here