PDA

View Full Version : Under a router, can't host

Azulo
27 Jun 2006, 03:53
I tried unlocking the ports mentioned in the FAQ, but people still can't join my hosted games

What else can I do? ._.
evilworm2
27 Jun 2006, 05:40
I tried unlocking the ports mentioned in the FAQ, but people still can't join my hosted games

Which ports?

What else can I do? ._.

Open the ports in your firewall, too. If you did already, read this:
http://www.nanacide.com/wahelp (recommended to read anyway)

what do you mean by 'unlocking' btw? You have to 'forward' the ports to your computer.
Etho
27 Jun 2006, 05:41
http://www.canyouseeme.org/

Goto that site and check if port 17011 is closed. If the site cannot see you, it means the required worm port is still blocked. (which I have a hunch it still is)
M3ntal
27 Jun 2006, 11:51
Handy site Etho, i'll have to remember that ;).
Run
27 Jun 2006, 12:38
Yeah. That's slightly more useful than whatismyip.com

*replaces bookmark*
tjhxbfx
28 Jun 2006, 13:48
What if my Router changed my ip adress i am unable to look at that port site.
becuz it uses the wrong ip adress.
M3ntal
28 Jun 2006, 15:44
It should still use the right IP address, because it *sends* its IP as the return address when it requests the page.
tjhxbfx
28 Jun 2006, 16:00
Error: I could not see your service on xx.xxx.xxx.xxx on port (17011)
Reason: Connection refused
M3ntal
29 Jun 2006, 06:24
Yeah, that means you're ports aren't forwarded correctly. Your IP will be fine.
Lex
29 Jun 2006, 09:04
It will only work if you are hosting a game, sillies. It looks for a service running on that port. I can host games behind a router, and I tried 17011, but it didn't work because I wasn't running the game-hosting service, obviously.
Run
29 Jun 2006, 11:56
Oh well that sucks then
[UFP]Ghost
29 Jun 2006, 16:44
same here XD
MrBunsy
30 Jun 2006, 13:13
Why not use the port scanning website from the W4 help guide?

https://www.grc.com/x/ne.dll?bh0bkyd2

/edit, oh it looks like it's doing the same thing. I'm sure it used to work though.
evilworm2
30 Jun 2006, 14:16
Why not use the port scanning website from the W4 help guide?

Because this doesn´t help, too.

Guys... the game ports are only open while the game is running...
MrBunsy
30 Jun 2006, 19:53
It used to work alright. It's possible the windows firewall has been updated or the new firmware on my router made a differece
Azulo
1 Jul 2006, 02:59
Ok, opening, lol
I used that guide to open port 17011, my router is a D-Link so I had no problems, that guide told me exactly what to do
But even doing it the port seems to be blocked, that site gave me that error too

And I'm not using any firewall D:
Muzer
1 Jul 2006, 09:39
What about in windows? Go to Start-Control Panel-Security center. If it says Firewall: On, you have a firewall software of some kind running. Have a look at www.nanacide.com/wahelp for instructions to configure it.

Also, make sure you've configured WA properly.
Azulo
4 Jul 2006, 06:06
Windows firewall seems to be deactivated
It's under something called "group policy" and I can't turn it on anyway, don't know why it happened...
If I check the firewall's status through cmd it says it's off

Well.. My router's a D-Link (ugh..) I have the virtual server thing with port 17011 , both TCP and UDP, and the port checking site says..

"Success: I can see your service on xxx.xxx.xxx.xxx on port (17011)
Your ISP is not blocking port 17011"

And I still can't host, lol .-.
Muzer
4 Jul 2006, 07:53
try it with 6667 and 80 as well
Granty
8 Jul 2006, 13:55
well if we have the ports forwarded but that site still cannot see you, what can you do?
Lex
9 Jul 2006, 10:11
Didn't you read my post? You have to have a service running on that port (AKA have to be hosting a game). So, run WA, host a game, minimize, then try that port checker.
Granty
9 Jul 2006, 10:19
Didn't you read my post? You have to have a service running on that port (AKA have to be hosting a game). So, run WA, host a game, minimize, then try that port checker.
theres no point if no1 can join ur game that pretty much answers ur question
bonz
9 Jul 2006, 10:49
theres no point if no1 can join ur game that pretty much answers ur question
Well, if you want to test if those ports are forwarded correctly, you would have to do what Lex said.
Maybe noone wanted to join your game at the moment you checked? :rolleyes:
Genexi2
9 Jul 2006, 14:20
Got the IPX protocol installed on your network device?

Had to do that to mine to be able to host.
Run
9 Jul 2006, 14:29
Maybe noone wanted to join your game at the moment you checked? :rolleyes:

Or maybe he typed a password and locked it ( :rolleyes::rolleyes::rolleyes: )
bonz
9 Jul 2006, 14:29
Or maybe he typed a password and locked it ( :rolleyes::rolleyes::rolleyes: )
Or maybe he dreamed that he has a computer. :D
Azulo
11 Jul 2006, 05:48
I said that site says the port is ok, but I still can't host. So maybe something else is blocking me, don't know.
I tried the other two ports but my router is kinda messed up and I can't really handle the configurations freely, maybe that's why I can't host yet...

Got the IPX protocol installed on your network device?

Had to do that to mine to be able to host.

What's that? .-.
Lex
11 Jul 2006, 06:40
You do not have to install IPX to be able to host. Just leave your setting in WA on TCP/IP rather than IPX/SPX. Fear the IPX.
bonz
11 Jul 2006, 22:28
Just leave your setting in WA on TCP/IP rather than IPX/SPX.
Works for LAN games only anyway, IIRC.